The compressor has been serviced, the tools work and production is ready to start. But can the manager find the written scheme and examination report for the air receiver? Those documents answer a different question from a service invoice.
For small engineering workshops across the North East, compressed air can become part of the background. A receiver stores energy, however, and failure can injure people nearby. This guide explains the management checks for a fixed workshop system in Great Britain; it is not an instruction to inspect, test or repair a pressure vessel yourself.
Start with the receiver, not the invoice
Record the receiver’s identity, location, capacity and safe operating limits from reliable equipment information. Match those details to the documents. A report for the old tank, another branch or a compressor with a similar model number is not evidence for the installed system.
HSE’s written-scheme guidance gives compressed-air receivers and associated pipework at 250 bar litres or above as a typical example likely to need a written scheme. That figure is pressure in bars multiplied by internal capacity in litres. It is a screening aid, not permission to decide that everything below it is free of safety duties. Ask a competent person to establish the applicable requirements and exceptions.
Do not use the gauge’s current reading as a substitute for establishing the system’s safe operating limits. If labels are illegible or records conflict, resolve the uncertainty before relying on the equipment. Include the associated pipework and protective devices in the discussion; the receiver is not the whole installation.
Separate servicing, the scheme and the examination
The Pressure Systems Safety Regulations 2000 are law. HSE’s leaflets explain how to comply; they are guidance. For qualifying equipment, HSE says a written scheme must be in place and an examination undertaken before use, whether the equipment is new or second-hand.
The scheme sets out what needs examination, how often and any preparation required. It must be drawn up or certified as suitable by a competent person. The examination report records the findings for that examination. Routine servicing maintains the equipment; neither a service sticker nor an insurance policy by itself demonstrates that these other requirements have been met.
Avoid assuming a universal annual interval. Work from the scheme and the examination report, including the next due date and any required repairs or restrictions. If a required examination is overdue or its status is uncertain, keep the affected system out of service while you obtain competent advice. Do not invent an extension because an appointment is booked.
Can your records identify the equipment on the floor?
Our health and safety inspections can help you check management arrangements and follow up missing evidence. Statutory pressure-system examinations require an appropriately competent specialist.
Give one manager ownership of the evidence
For an installed system, PSSR duties generally sit with its user; for a mobile system, they generally sit with its owner. Hiring equipment does not remove the need to check that the scheme and examination evidence are in place. Any supplier agreement taking on specified duties needs to be clear and in writing.
Choose a named manager to keep the asset record, arrange specialist attendance and track actions. Give that person access to the latest scheme and reports, not just the purchase folder. Ask the specialist what must be done before the visit, who will prepare the equipment and how downtime will be managed.
When a receiver is replaced, pipework extended or operating conditions changed, tell the competent person. Ask whether the scheme, examination arrangements and operating instructions need review. Do this while planning the change, rather than after the new equipment has entered routine use.
Make everyday instructions usable
HSE expects suitable maintenance, functioning protective devices and people with the skills and knowledge needed for their tasks. Use the manufacturer’s information and competent advice to set the maintenance plan. Examination does not replace it.
Operators need clear instructions on normal use, reporting defects and what to do in an emergency. They should know who can take equipment out of use and who can authorise its return. Do not allow improvised pressure adjustments or repairs. A manager’s visual check is not a substitute for technical examination.
Keep the operating instructions where they can be used, including by cover staff. Ask a worker to explain the reporting route in their own words. That small check can reveal a gap which a signed training sheet misses.
Six checks before you close the action
- The receiver and documents have matching identification.
- A competent person has confirmed the applicable requirements.
- The written scheme covers the actual system where required.
- The examination is current and required actions are tracked.
- Maintenance and operating instructions are available and understood.
- A named manager owns the next examination date and any changes.
Make the next due date someone’s responsibility
Start by matching one receiver to its records today. If equipment registers and follow-up actions need wider attention, retained safety support can help you keep the management process organised.
Sources and scope
Checked 19 November 2026. This is evergreen guidance for Great Britain, not a new legal announcement. HSE’s INDG178 leaflet was published in 2012; the live guidance below was checked for this article.
- HSE: PSSR duties and exceptions
- HSE: Written schemes and examination
- HSE: Using pressure systems
- HSE: Written schemes of examination, INDG178
Cover: AI-generated illustration of a fictional workshop, not a customer site or real incident.




